Your carpets are disgusting. They just are, because people live in your house. I’m not talking about spills and stains, which may be part of your problem. I’m talking about gross disgusting dust, because despite what you may think: dust is not just on your furniture and baseboards.
There is Dust on Your Floor!
- plant pollen
- human and animal hairs
- human skin cells
- textile fibers
- paper fibers
- minerals from soil
Wherever there is dust, there are dust mites. There is some link between asthma and dust mites, which are usually found in the floor, especially carpet.
Regularly washing your carpets will keep them bright and shiny new looking!
Step 1 – Vacuum
The first step of carpet cleaning is vacuuming. This should be done regularly. Without animals, once a week should be frequent enough, with small touch-ups in main areas when needed.
I use this vacuum because it has a “max” function that is scary-powerful and a HEPA filter good for allergies!
Before you clean your carpets with wet soap, give them a good vacuum! It will save you lots of work.
Step 2 – Use Your Home Carpet Cleaner
You can mix your own cleaning solution or use the packaged stuff. My mix is definitely the least expensive! This mixture will go into the soap compartment of whichever carpet cleaner you use.
- 1 gallon water
- 1 Tablespoon Basic H2
- 1 scoop Nature Bright
Choose a Carpet Cleaner:
There are a few options out there. I’ve had this carpet cleaner for more than 5 years and it is still going strong. (It is still one of the best rated on Amazon.)
Rent or choose a carpet cleaner of your choice, but you’ll need something to wash the carpets with soap.
Cleaning How To:
Before you use the carpet cleaner, remove any light objects you can pick off the floor. These directions are specific to the Carpet Cleaner above, but a lot will be similar for whatever carpet cleaner you use.
You put the soap in the small soap compartment of the cleaner and then clean water in the big compartment.
Leave the bottom bucket empty: it will fill up with the dirty water! Below is the dirty water from ONE vehicle carpet.
After the solution and water are in place, select the cleaning mode and then simply press the wash-trigger while you move the carpet cleaner around. The trigger is what puts the soap down. While it is just ON, it will just be in the sucking-water-out-of-the-carpet mode.
- Go slow enough to thoroughly clean, but do not leave it in one spot pulling the trigger too long or that place will become very wet.
- Go over it a second time without pressing the wash-trigger so the carpet will dry faster.
Befores & Afters:
When my Sister-in-Law visited, I tried the carpet cleaner on a carpet from her van while she was cleaning it out. It made a huge difference! Also, this tiny carpet produced the dirty water in the picture above!
When we moved in to our Texan home last fall, I cleaned all the carpets before any furniture was moved in.
The 3 Girls Room (where they sleep):
The 3 Girls Clubhouse (where they keep desks/books/hobby stuff):
The Power to Do-It-Yourself:
It is so nice being able to clean my carpets any time I want. I’ve saved a lot of money over the years doing my own DIY Carpet Cleaning. Plus, I don’t have to live in fear of kids messes and accidents – they happen and I can clean it myself.
Do you clean your own carpets? Will you try now?
Don’t forget to get your Spring Cleaning Printable Pack and get ready for a very clean house! See how I made a booklet out of the checklist in the pack and how my kids help me!
Don’t forget to pin this post for later!